Solar Biodiverse Roof
The Sempergreen Solar Biodiverse Roof is a special green roof system for flat roofs, which combines a green roof with a biodiverse mix of plants and the Sempergreen Solar mounting system. Nearly all kinds of PV panels can be placed on the Sempergreen Solar Stand. The green roof system acts as the ballast, providing the necessary weight to secure the solar panels on the roof.
This green roof not only increases the energy yield of the solar panels (with 6 to 20%), it also boosts the local biodiversity! Due to the variety of plant species in the Sempergreen Biodiverse blanket Sedum-herbs, the thickness of the substrate layer, and the fact that a solar panel can act as a shelter, the Solar Biodiverse Roof is an ideal haven for birds and insects.
Solar Biodiverse Roof 0-5° specifications
Pitch: 0-5°
System structure thickness: from 125 mm
Saturated weight: from 100.9 kg/m² (excl. PV panels)
Water buffering capacity: from 26.4 l/m²
Would you like to create an even more optimal green roof for birds and insects? Supplement the Solar Biodiverse Roof with Sempergreen Biodiversity Packages!
System structure
1 Sempergreen Solar Stand, excl. PV panel
Consisting of a base plate, profile holder and mounting profiles. Incl. mounting clamps for the PV panels. The PV panels can be placed in both Landscape and Portrait positions in various orientations (South/East/West) and angles of inclination (10˚ and 15˚). This system can be used in combination with nearly every type of solar panel.
2 Sempergreen Biodiverse Blanket Sedum-herbs 40 mm
Pre-cultivated Biodiverse blanket Sedum-herbs (40mm). Consisting of a mix of 20-25 different types of herbs and 4-6 different types of Sedum. Sempergreen vegetation blankets always boast at least 95% coverage upon delivery.
3 Roof garden substrate - from 70mm
Thickness and type of roof garden substrate is determined based on the wind load calculation and the ballast plan. Produced in accordance with FLL guidelines.
4 Base Plate Sempergreen Solar Stand 60 mm
Dimensions 1980 x 980 x 60 mm (LxWxH). Made of recycled HDPE with screw thread for attaching the profile holder. Installation in accordance with the grid plan and instructions.
5 Drainage sheet 10C
Thickness 10 mm. Sheet with dimpled cores made of recycled HPDE. Covered with a polypropylene filter fleece bonded to the top side of the sheet.
6 Protective cover
Weight 300 gr/m². Made of recycled fibres.
7 Root barrier foil
Optional; only applicable to roofs without root-resistant roofing material.
If you’re in need of a more lightweight solution, you have the option of the Solar Sedum Roof system! Read more here.
Would you like to know more?
Are you interested in a Sempergreen Solar Biodiverse Roof for your project, or are you looking for more information? Get in touch with our experts, or request a quote.